PARANDUS: Rakendust ei õnnestunud õigesti käivitada 0xc0000005

Windows 10 on Microsofti üks oodatumaid Windowsi versioone. Kuigi Windows 8 lõi töölaua OS maailmas uue trendi, oli sellel disainis ja jõudluses mõningaid probleeme, mis olid Microsofti jaoks põhirõhk Windows 10-s. Niisiis, Windows 10 Final Build ilmus 29. juulil 2015 Desktop as samuti nutitelefonid.

See sisaldas palju muudatusi, pidades silmas Windows 8 vigu. Tegelikult on see Windowsi täiustatud versioon, kuid siiski tekivad iga päev erinevate kasutajatega mitmed tagajärjed .

Suurema osa nendest tagajärgedest moodustavad vead, mis ilmnevad konkreetse ülesande täitmisel. Paljud inimesed on saanud tõrketeate, kui nad proovisid oma Windows 10-s erinevat tarkvara ja brausereid avada. Selle tõrke juurde kuulub tõrketeade, mis ütleb, et rakendust ei õnnestunud õigesti käivitada (0xc0000005). Rakenduse sulgemiseks klõpsake nuppu OK . See viga ilmneb tavaliselt Interneti-brauserites, kuid see ei piirdu nendega. Kõik Windowsi sisesed rakendused võivad selle tõrke tõttu reageerimise lõpetada. Niisiis, see tuleb parandada, et need olulised tarkvarad jälle tööle asuda.

12.11.2016: kasutajad teatasid, et allpool loetletud meetodid töötavad ka Windows 7-s.

Windows 10 tõrke 0xc0000005 põhjus:

On mitmeid teadaolevaid põhjuseid, mis põhjustavad selle tõrke häirimist Windows 10 mitmesuguse tarkvara töös. Üks peamistest põhjustest peetakse kolmanda osapoole viirusetõrjeprogrammi, mis põhjustab käivitatavate failidega konflikte ja mõjutab nende toiminguid. Teisest küljest võivad registrid rikutud olla pahavara ja viiruste tõttu, mis põhjustavad programmide ebaharilikku käitumist. Mõnikord võivad selle tõrke põhjustajaks olla ka halvad riistvaradraiverid .

Lahendused Windows 10 tõrke 0xc0000005 parandamiseks:

Eespool nimetatud põhjustel on lahendused sirgjoonelised. Niisiis, sellest pettumuslikust veateatest vabanemiseks läbige järgmised meetodid.

Parandage rikutud süsteemifaile

Laadige alla ja käivitage Restoro, et siit korrumpeerunud ja puuduvad failid skannida ja taastada , jätkake allpool toodud lahendustega. Enne alltoodud lahendustega jätkamist on oluline tagada, et kõik süsteemifailid oleksid terved ja rikutud.

1. meetod: viirusetõrjeprogrammi parandamine

Viirusetõrjeprogrammid võivad mõjutada paljude programmide käivitatavaid faile. Niisiis peate selle probleemi lahendamiseks kolmanda osapoole viirusetõrjeprogrammi keelama, et kontrollida, kas see oli süüdlane või mitte. Pange tähele, et viirusetõrjeprogrammide keelamine võib Interneti-ühenduse loomisel teie arvutit tõsiselt ohustada.

Võite tugineda ka Windowsi enda turvatarkvarale, st Windows Defenderile . Sellel on sama funktsioon kui mis tahes muul viirusetõrjel. Viirusetõrje saate keelata, navigeerides selle seadetesse ja lülitades kilbi välja.

0xc0000005-1

Pärast selle keelamist kontrollige viga uuesti. Kui see endiselt püsib, minge järgmise meetodi juurde.

2. meetod: registrite parandamine

Registri on keskandmebaasi Windows, mis on pidevalt kasutatud arvuti, et aidata tal lugeda palju erinevaid faile ja seaded, et see peab kulgema. Registrid võivad rikutud olla, kuna kõik teatud failid on kahjustatud, et kõik asjad kokku panna. Seetõttu soovitavad enamik eksperte teil varundada oma register ja hoida see varukoopia tavalisel USB-mälupulgal, et saaksite korruptsiooni korral oma registri eelmises olekus taaselustada. Aga kui te ei varundanud oma registrit, järgige neid samme registrite parandamiseks vea 0xc0000005 lahendamiseks .

1. Sellelt lingilt laadige alla registripuhasti tarkvara .

2. Pärast allalaadimist installige see soovitatud sätete abil. Pärast installiprotsessi lõppu avage tarkvara.

3. Klõpsake liidesel vasakul paanil oleval vahekaardil Register ja klõpsake nuppu Scan for Issues . See hakkab registris vigu otsima ja kui otsing on lõpetatud, aktiveeritakse nupp Parandage valitud probleem . Klõpsake seda nuppu ja kõik saab korda.

0xc0000005-2

3. meetod: vigaste draiverite parandamine

Draiverid on tarkvaraprogrammid, mis aitavad arvutil suhelda sellele lisatud riistvaraga. Niisiis, kui need on kahjustatud, kipub riistvara tekitama tõrkeid . Nende vigaste sukeldujate parandamine võib teid mitmel viisil aidata. Järgige alltoodud samme.

1. Avage seadmehaldur , vajutades Win + X ja valides selle loendist.

2. Kerige seadmehalduris sees, et näha, kas seal on kollase märgiga riistvara. Kui on, siis paremklõpsake seal ja valige käsk Uuenda draiveritarkvara . Kui olete draiverid hiljuti installinud, installige ka need draiverid uuesti.

0xc0000005-3

3. Klõpsake pärast ilmuvas aknas valikut Otsi automaatselt värskendatud draiveritarkvara otsimiseks, et see saaks draivereid automaatselt otsida ja installida. Juhul, kui olete draiverid käsitsi alla laadinud, klõpsake nende sirvimiseks ja installimiseks allpool olevat valikut. Pärast protsessi lõppu kontrollige viga.

0xc0000005-4

Meetod nr 4: parandage BCD

Seda meetodit peavad kasutajad kasutama omal vastutusel. See töötas mõnel ja mõnel mitte. Pärast selles juhendis kirjeldatud toimingute tegemist peate ka Windowsi uuesti aktiveerima.

  1. Hoidke Windows Key ja vajutage X . Valige käsuviip (administraator)
  2. Tippige “ bcdedit” ja vajutage sisestusklahvi (ENTER). Kui teie Windowsi alglaadurite tee on xOsload.exe, peate mõned failid eemaldama ja BCD parandama. Pärast käsubcdedit” käivitamist näete seda väljal PATH .
  3. Kui olete valmis, täitke järgmised käsud allpool, mõned võivad naasta, et neid ei leitud, kuid ignoreerivad vigu ja jätkavad viimast. Veenduge, et vajutasite iga käsu järel klahvi ENTER.
Del D: \ Windows \ System32 \ xOsload.exe Del D: \ Windows \ System32 \ xNtKrnl.exe Del D: \ Windows \ System32 \ Drivers \ oem-drv64.sys atribuut c: \ boot \ bcd -h -r -s ren c: \ boot \ bcd bcd.old bootrec / rebuildbcd

5. meetod: Windowsi värskenduste otsimine

Windowsi värskendused sisaldavad sageli mõne vea ja tõrke parandust, kuid need on tuntud ka inimeste arvutites uute probleemide leidmise poolest. Selles etapis kontrollime siiski teie operatsioonisüsteemi värskendusi, kuna Microsoft parandab sageli nende värskendustest tulenevaid probleeme. Selleks järgige allolevat juhendit.

  1. Windowsi sätete avamiseks vajutage klahvi „Windows” + „I” .
  2. Klõpsake seadetes valikul „Värskendused ja turvalisus” ning vasakust servast valige suvand „Windows Update” .
  3. On the next screen, click on the “Check for Updates” option and it will automatically prompt Windows to check for any available updates.
  4. After the update check is complete, click on the “Download” button to trigger the downloading and installation of new updates on your computer.
  5. After these updates have been installed, check to see if doing so has fixed the issue on your computer.

Method 6: Restoring Computer

If you have just started getting this issue, it might be getting triggered due to a faulty driver installation or even due to a rogue application that you might’ve installed on your computer recently. Therefore, in this step, we will be reverting the state of the computer to an earlier date and hopefully, this should get our issue fixed if it was due to the above-stated reasons. In order to do this:

  1. Press “Windows” + “R” to open the Run prompt.
  2. Type in “rstrui” and press “Enter” to open the restore management window.Käivita dialoog: rstrui
  3. Click on “Next” and check the “Show more Restore Points” option.
  4. Select a restore point from the list that is before the date on which this issue started occurring.
  5. Click on “Next” again and follow the on-screen instructions to revert everything back to the selected date.
  6. After the restore is completed, check to see if the issue still persists.

Method 7: Enable Firewall

It is possible in some cases, that the error is being triggered because the application is suspicious or at least if it has been marked suspicious and the Windows Firewall isn’t running on your computer to validate this suspicious. Therefore, in this step, we will be making sure that the Windows Firewall is enabled in order to get rid of this error. For that:

  1. Press “Windows” + “R” to open the Run prompt.
  2. Type in “Control Panel” and press “Enter” to launch the classical Control Panel interface.
  3. In the Control Panel, click on the “ViewBy:” option and select the “Large Icons” button.
  4. After making this selection, click on the “Windows Defender Firewall” option to launch the Firewall and then select the “Turn Windows Defender Firewall On or Off”.
  5. Make sure to check the “Turn on Windows Defender Firewall” for both the available options to turn the Firewall on.
  6. After making this selection, save your changes and close out of the Window.
  7. After doing so, check to see if the issue still persists.

Method 8: Run SFC Scan

In some situations, you might’ve installed a bad driver on your computer or at some point, due to a storage failure, some system files or drivers might’ve been corrupted. Therefore, in this step, we will be running a complete system scan to identify any drivers that are missing signatures or to fix any abnormalities in the system files. For that:

  1. Press “Windows’ + “R’ to open the Run prompt.
  2. Type in “cmd” and then press “Shift’ + “Ctrl” + “Enter” to provide admin permissions.Running the Command Prompt
  3. Type in the following command inside the command prompt and press “Enter” to execute it.
    sfc /scannow
  4. Let the computer scan for any broken or corrupted items and it should automatically replace them with working ones.
  5. Check to see if doing so fixes the error message.

Method 9: Disabling Data Execution Prevention

Data Execution Prevention is a program that prevents certain programs or executables from being able to run on your computer because it suspects that they might be viruses. Due to this prevention, sometimes, as a false alarm, legit applications might also face issues while trying to run on your computer. Therefore, in this step, we will be disabling this setting from the system configuration panel. For that:

  1. Press ‘Windows’ + “R’ to open the Run prompt.
  2. Type in “Control Panel” and press “Enter” to launch the classical control panel interface.
  3. Inside the Control Panel, click on the “View By:” icon and then select the “Large Icons” option.
  4. After selecting Large Icons, select the “System” option.
  5. Click on the “Advanced System Settings” option on the left side of the screen.
  6. In the advanced System Settings, click on the “Advanced” tab from the top.
  7. In the advanced tab, click on the “Settings” option under the “Performance” heading.Valige Seaded
  8. On the next window that opens up, click on the “Data Execution Prevention” tab, and then select the “Turnon DEP for all programs except thoseI Select” option.
  9. After that, click on the “Add” option and point to the executable of the application that you are facing issues with.
  10. This way, that application will no longer come under the jurisdiction of the DEP program.
  11. Check to see if doing so has fixed the issue.

If the above process is unable to fix the issue, it might be because the executable isn’t the only one being affected by the DEP program. Sometimes the DEP might actually be preventing a herd of executables from being run on the computer and to counter this we will be disabling DEP completely.

Disabling DEP completely cannot be done through any Windows setting and it needs to be done manually through the command prompt. Remember to take this step as a last resort because this can in some cases makes your computer more vulnerable to viruses and malware attacks. In order to disable DEP through the command prompt:

  1. Press “Windows” + “R’ to open the Run prompt.
  2. Inside the Run prompt, type in “cmd” and then press “Shift” + “Ctrl” + “Enter” to launch in admin mode.
  3. Inside the command prompt, type in the following command and press “Enter” to execute it on your computer.
    bcdedit.exe /set {current} nx AlwaysOff
  4. Once the command has been executed, run the application that you want to and check to see if the error message still persists.

Method 10: Disable Firewall and Windows Defender

In some situations, the executable that you want to run on the computer might actually be blocked by the Firewall and it would not be able to make contact with its servers this way. Therefore, we will have to allow the executable in our Firewall for both public and private networks which should get it working if the Firewall is preventing it.

In addition to that, sometimes the Windows Defender might prevent the application from running on your computer because its local files might be suspicious and not properly signed. This can be due to a false alarm as well so we will be disabling the Windows Defender for the application as well by adding an exclusion. In order to do that:

  1. Press “Windows” + “R” to launch the Run prompt.
  2. Type in “ControlPanel” and press “Enter” to launch the classical control panel interface.
  3. Click on the “View by:” button, select “Large Icons” and then click on the Windows Defender Firewall option.
  4. Select the “Allow an app orfeature through the Firewall” button on the left pane and then click on the “Change Settings” button and accept the prompt.Klõpsake käsul Luba rakendus või funktsioon Windows Defenderi tulemüüri kaudu
  5. From here, make sure that you check both the “Public” and the “Private” options for the application and its entries.
  6. Save your changes and exit out of the window.
  7. After that, press “Windows” + “I” to launch the settings and click on the “Updateand Security” option.
  8. From the left pane, click on the “Windows Security” button and then click on the “Virus and Threat Protection” button.
  9. Select the “Manage Settings” button under the Virus and Threat Protection Settings heading.
  10. Scroll down and click on the “Add or Remove Exclusions” button in the next window.
  11. Click on the “Add an Exclusion” option and select “Folder’ from the File type.
  12. Make sure to specify the application’s folder with which the issue is occurring and exit out of this window after saving your changes
  13. Check and see if doing so has fixed the error message.

Method 11: Reinstall Firefox

If you are getting this error while trying to launch Firefox, it might be occurring because the applications haven’t been installed properly on your computer. Therefore, in this step, we will be launching the app management window and uninstalling Firefox after which we will reinstall it completely by downloading it from the Firefox website. For that:

  1. Press “Windows” + “R” to open the Run prompt.
  2. Type in “appwiz.cpl” and press “Enter” to open the app management window.
  3. In the app management window, scroll down and right-click on the “Firefox” application.
  4. Select “Uninstall” from the list and then follow the on-screen instructions to remove the software from your computer.
  5. Repeat this step for all instances and bundled applications of the software installed on your computer.
  6. Make sure to disable any third-party antiviruses at this point to make sure that the software is installed smoothly.
  7. Head on over to the Mozilla website and click on the download button.
  8. Click on the downloaded executable and install it on your computer following the on-screen instructions.
  9. Check to see if doing so has fixed the error message on your computer.

Method 12: Scanning for Malware

It is possible in some cases that the computer has acquired malware that is preventing the user from being able to run all the system functions on their computer. Therefore, in this step, we will be using the default Windows Defender to scan our computer thoroughly for any viruses or malware that might’ve found its way on our computer. For that:

  1. Press the “Windows” + “I” keys simultaneously on your PC to open the Settings tab.
  2. Navigate to the Update& Security option and then click on the “Windows Security” button on the left tab.
  3. After that, click on the “Open Windows Security” and select the “Virus and Threat Protection” option.
  4. After that, click on the “Scan Options” button below the “Quick Scan” window.
  5. Click on the “Full Scan” option and then hit the button of “Scan Now”.
  6. Wait for a few seconds while this process gets completed and then finally check if the error gets resolved now.

Microsoft Security Scanner is an additional tool that you can use to test the system for any further viruses and malware because sometimes the default tool isn’t able to perform the scan properly. Therefore, in this step, if the issue still hasn’t been resolved, we will be using the Microsoft Security Scanner to further make sure for any issues.

  1. Launch your browser and download the Microsoft Security Scanner from here.
  2. After downloading the executable, run it on your computer and let it install.
  3. Accept the License Agreement terms and click on “Next”.
  4. Select “Full Scan” and click on “Next”.
  5. After you opt for a full scan, the software will start scanning your entire computer to look for any malware or viruses that might’ve disguised themselves as normal executables or applications.
  6. After this scan has been finished, check to see if the error message still persists.

Method 13: Install Missing Drivers

It is possible in some situations that your device is missing certain drivers due to which this particular issue is being triggered on your computer. Therefore, we will be checking for any missing drivers and then we will check to see if the error is fixed. In order to do this, follow the guide below.

  1. Download Driver Easy on your computer.Laadige alla draiver Easy
  2. Run the downloaded executable and install the software on your computer.
  3. Run the check and see if there are any missing drivers on your computer.
  4. Install these missing drivers and then install them either manually or automatically using the Software.
  5. After installing all the missing drivers, check to see if the issue still persists.

Method 14: Reconfigure Registry

It is possible that in some cases, you haven’t properly configured all the registry settings or that you unknowingly configured something incorrectly. Therefore, in this step, we will be reconfiguring our Registry to fix a certain key that sometimes, if misconfigured, causes this particular error on Windows. In order to do this, follow the guide below.

  1. Press “Windows” + “R” to open the Run prompt.
  2. Type in “regedit” and press “enter” to launch the registry editor.
  3. Inside the registry editor, navigate to the following location.
    HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Windows\AppInit_Dlls
  4. Double click on the “LoadAppInit_DLLs” entry on the right side of the screen.
  5. Change the value of this registry from “1” to “0”.
  6. Save your changes and exit the registry editor.
  7. Check to see if doing so has fixed the error.

Method 15: Update Disk Drivers

In some cases, the Disk Drivers that are being used to control your Storage and other Disks installed on the computer might have been outdated due to which the error is being triggered. Therefore, in this step, we will first be opening the Device Management Window and from there, we will be updating these drivers. In order to do so, follow the steps mentioned below.

  1. Press “Windows’ + “R” to open the Run prompt.
  2. Type in “Devmgmt.msc” and press “Enter” to launch the device management window.
  3. In the Device Manager, double click on the “DiskDrives” option to expand it.
  4. Right-click on the storage device listed and select the “Update Driver” option.
  5. Select the “Search Automatically for Drivers” option and let the setup search.
  6. If there are any drivers available, Windows will automatically check for them and install them on your computer.
  7. Check to see if doing so has fixed the issue.

Method 16: Disabling Automatic Updates and Uninstalling Updates

It is possible in some cases, that this error is stemming from a faulty update install. Microsoft is notorious for pushing out updates that aren’t properly customized to work for all hardware combinations and often go on to break things instead of making them better. Therefore we will make sure that the recent update isn’t installed on our computer.

In order to do this, we will have to first disable automatic updates on our computer and then we will be uninstalling the recently installed updates. Make sure to back up any important data that you don’t want to lose just in case this goes bad.

  1. Press “Windows” + “R’ to open the Run prompt.
  2. Type in “service.msc” and press “Enter”.
  3. Scroll through the list and double click on the “Windows Update” service.
  4. Click on the “Stop” button and then click on the “Startup Type” dropdown.
  5. Select “Disabled” from the list and select the “Apply” button from the window.
  6. Click on “OK” to close out of this window.
  7. Check to see if doing so has stopped your computer from updating.

After stopping the computer from updating, we will now be uninstalling the recent updates that have been installed on your computer. For that:

  1. Press “Windows” + “I” buttons to open the settings.
  2. In settings, click on the “Update and Security” option and then select the “Windows Update” button from the left pane.
  3. In the Windows Update, click on the “View Update History” option.
  4. In the Update History, click on the “Uninstall Updates” option and it should take you to the uninstallation screen where all the recently installed updates will be listed.
  5. From the list, right-click on the update that was installed recently and caused this error on your computer.
  6. Right-click on this update and select the “Uninstall” button to remove it completely from the computer.
  7. Follow through with the on-screen instructions.
  8. Check to see if uninstalling has fixed this issue.

Additional Fixes:

  • In addition to some of the recommendations given above, you should try to check if there are any bad memory modules (RAM) installed on your computer which can be a cause of this.
  • Samuti kontrollige kindlasti, kas te pole oma RAM-i kiirendanud taset, mis ületab soovitatud piiri. Kui olete seda teinud, proovige see tehaseseadetele tagasi tuua ja kontrollige, kas see teie probleemi lahendab.